Turntable Lenco LS-50TQ
Turntable Lenco LS-50TQ
Lenco LS-50 - it is a modern vinyl player with two built-in speakers.
Acoustics:
Built-in
Automation or mechanics:
Semi-automatic. There is a hitchhiker.
How are the speakers connected?
It is possible to connect to an external stereo system. At the same time, the Lenco LS-50 is equipped with standard RCA connectors for line output, which allows you to use any suitable cables for connection.
Connection options:
Wired. Wireless.
The presence of a built-in phono equalizer:
Yes. Equipped with a built-in phono equalizer - can be connected to an external stereo system.
Disc rotation speeds:
33, 45, 78.
Availability of anti-skating:
There is none.
Auto stop:
Yes.
Tone arm, cartridge:
The light tonearm is mounted on a high-quality bearing that ensures its smooth movement. A MM pickup is mounted on the tonearm, which is fully tuned. Ceramic cartridge 402-M208-015 has a replaceable needle (0.7 mm) - thanks to this, the installation will not require re-adjustment of the player.
First setup:
No settings required. It remains only to check the accuracy of the set pressure.
Appearance, decoration:
The body of the player is made of medium-density fiberboard, the top panel is finished with natural wood veneer. The disc with a diameter of 300 mm is made of plastic, the set includes a felt slipmat of black color. The curved tonearm is made of durable plastic and has static balancing. A spare needle is supplied with the player. It should be noted that the design of the shell of the complete tonearm allows replacement of the cartridge.
The player is a passive disk drive and supports three rotation speeds - 33.3, 45 and 78 revolutions per minute - switched by a three-position toggle located at the base of the tone arm. Next to it is a switch - it is responsible for the operation of the hitchhiker and starting the disc player.
The ON position is enough to move the tonearm towards the spindle and the disc will start rotating.
OFF position - the disk starts spinning immediately after the power supply, which the player receives from an external 12-volt adapter.
On the back of the case there is an RCA output and a USB-B port for digitizing records. The kit includes a plastic dust cover.
There are round dome speakers in the left and right legs of the player. Each of them is provided with a 2-watt amplifier, and the volume level is adjusted using the knob in the lower right part of the top panel of the player.
Weight:
3.4 kg
Digitization function:
Yes. It is possible to transfer the actual recording to digital files via the USB port.
What's included:
Player, 45 TPM adapter, AC adapter, cleaning cloth, dust cover, extra needle, slipmat, software CD.
Features:
Built-in acoustics
Semi-automatic (hitchhiking after the end of the record)
Electronic speed change
Built-in phono equalizer and USB output for PC
Technical characteristics:
MATERIAL: Plastic, wood
INPUT VOLTAGE OF THE NETWORK ADAPTER 1 (V): 220-240 V
INPUT FREQUENCY OF NETWORK ADAPTER 1: 50-60 Hz
OUTPUT VOLTAGE OF MAINS ADAPTER 1 (V): 12.00 volts
OUTPUT CURRENT OF NETWORK ADAPTER 1: 1.00 amps
OUTPUT POWER OF NETWORK ADAPTER 1 (W): 12.00 W
AC ADAPTER NO-LOAD POWER CONSUMPTION 1 (W): 0.04 W
OFF MODE POWER IN WATTS 1: 0.100 W
NUMBER OF SOUND CHANNELS: Stereo 2.0
NUMBER OF EXTERNAL SPEAKERS: 2
TOTAL POWER OUTPUT (W): 4.00 W
AUDIO/VIDEO/DATA OUTPUT: RCA OUT, USB-B PC encoding 1x
AUDIO / VIDEO / DATA SOURCES: LP
BATTERY STATUS INDICATOR: None
INTERNET RADIO: None
ANTI-SKATING: None
SWIVEL TYPE: Normal
PLAYER WITH BLUETOOTH®: None
MP3 ENCODING: Yes, via PC
MECHANICAL LIFT: Yes
NEEDLE PRESSURE ADJUSTABLE: Yes
ALTITUDE CONTROL: None
TYPE OF TURNTABLE DRIVE: Belt transmission
Hitchhiker: Yes
AUTO RECOVERY: None
WEIGHT OF THE PRODUCT (KG): 3.40 kilograms
EXTERNAL SPEAKER IMPEDANCE (Ω): 0.00 Ω
SPEED OF SPINDLE REVOLUTION: 33, 45, 78
SUPPORTED RECORD TYPES: 7, 10, 12
SELECTION SYSTEM TYPE: Ceramic
PLATE MATERIAL: plastic
PRE-AMP: Yes
PLAYER WITH SPEAKER(S): Yes, built-in
DIMENSIONS: (L x W x H) 410x330x118 mm
WEIGHT: 3.4 kg
-
8339 грн.