Turntable Audio-Technica AT-LP70XBT White/Silver

Turntable Audio-Technica AT-LP70XBT White/Silver

Automatic Turntable AT-LP70XBT - the perfect choice for any audiophile, especially one just starting their vinyl journey.

It's designed for those who appreciate the sound of vinyl, from the thrill of browsing record stores to the pleasure of playing a record, touching the tonearm and enjoying the album art while the music fills the room.

Experience the warmth and richness of analog sound combined with the convenience of Bluetooth® technology. Play vinyl on speakers, headphones or other Bluetooth-enabled devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec.

Automation or mechanics?

Automatics! Simply select a speed (33⅓ or 45 rpm) and press the Start and Stop buttons for automatic operation, or use the tonearm lift lever to play specific tracks. It's that simple!

Need acoustics?

Yes. 

Connection options:

Wireless connection to speakers and other devices equipped with Bluetooth wireless technology, or to audio systems and active speakers using the included dual RCA cable.

The presence of a built-in phono equalizer:
Features a built-in switchable phono preamp that allows you to connect the player to your home stereo system, powered speakers, or other component, with or without a dedicated phono preamp input.

Disc rotation speeds:
This player combines the warmth of analog audio with easy-to-use features, supporting both 33-1/3 and 45 rpm recordings.

Tone arm, cartridge:

Built on Audio-Technica's expertise in phono cartridge manufacturing, the AT-VM95C is a versatile cartridge with excellent performance that other players in this class simply cannot match. Integrated into the J-shaped tonearm, the AT-VM95C cartridge with a 0.6mm conical tip provides excellent channel separation and low distortion for excellent sound quality. To further personalize your vinyl listening experience, the stylus can be easily swapped out for any other stylus (elliptical, micro-linear or Shibata) from our VM95 series, offering unprecedented customization options for a player in this category.

First setup:
Since the J-shaped tonearm is equipped with the built-in AT-VM95C cartridge, there is no need to install, balance or adjust the tonearm.

Appearance:

The AT-LP70XBT has a nice functional design with an anti-resonance cast aluminum plate and a compact design.
Dust cover, also made of transparent plastic.
The stylish three-component construction of the case dampens resonance to improve sound quality.

Features:

• Fully automatic belt rotary table with two speeds: 33-1/3 and 45 rpm.
• High-quality sound thanks to wireless Bluetooth technology
• Connect wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via the included dual RCA output cable
• Compatible with high-quality Qualcomm® aptX™ Adaptive audio codec
• The AT-VM95C Integral Dual Moving Magnet™ phono cartridge with a fixed housing is compatible with any interchangeable stylus in the VM95 series, offering a wide range of options for every budget and application
• The stylish three-component housing construction dampens resonance to improve sound quality*.
• The J-shaped tonearm is designed to minimize tracking errors
• Locking the tonearm reduces the risk of damage to the stylus
• Built-in switch phono corrector/line preamplifier
• Anti-resonance, cast aluminum plate with felt lining
• The AC adapter performs AC/DC conversion outside the enclosure, reducing noise in the signal circuit

Technical characteristics:

Technical characteristics of communication

Communication system - Bluetooth version 5.2
RF output - 2.5 mW EIRP
Maximum communication distance - Line of sight - approximately 10 m
The frequency range is 2.402 GHz - 2.480 GHz
The modulation method is GFSK Pi/4DQPSK 8DPSK
Compatible Bluetooth profile - A2DP
Supported codecs are Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, SBC

Technical characteristics of the player

The motor is a direct current motor
Drive method - Belt drive
Speed ​​- 331/3 rpm, 45 rpm
Plate - Die-cast aluminum
Noise and vibration < 0.25% (WTD)
Signal-to-noise ratio > 55 dB

Output level

- PHONO: 4.0 mV nominal at 1 kHz 5 cm/s;
 - LINE: 252 mV nominal at 1 kHz 5 cm/s;

The gain factor of the phono corrector is 36 dB nominal RIAA equalizer

Technical characteristics of the tonearm

Effective length - 220 mm (8.7")
Reach - 18 mm (0.71")
The maximum tracking error angle is less than 2.0°.

Characteristics of the cartridge

This product is equipped with an AT-VM95C stereo cartridge with two moving magnets. The cartridge cannot be removed.
Cartridge model - AT-VM95C
Cartridge type - VM
The recommended load resistance is 47000 ohms
Output voltage - 4.0 mV (mV at 1 kHz 5 cm/sec)
Needle - conical, 0.6 millimeters, glued
Aluminum cantilever

Additional information
This product is equipped with the AT-VM95C stereo cartridge with two moving magnet stereo cartridges. The cartridge cannot be removed

AC adapter

Type - FJ-SW1261200500DN
Nominal input voltage - from 100 to 240 V AC
Nominal input current - 0.4 A max.
Nominal frequency - 50 Hz / 60 Hz
The nominal output voltage is 12 V DC
Nominal secondary current - 0.5 A
The length of the cable is approximately 1.5 m

The included AC adapter may differ depending on the country of sale. Check the rating on the AC adapter label. For details, contact your local Audio-Technica dealer.

General technical characteristics

Dimensions 400 mm × 330 mm × 110 mm 
Weight - approximately 2.9 kg
Power consumption - 1.6 W

Accessories

• Dust cover,
• felt rug,
• plate (with drive belt),
• hinges for dust cover,
• adapter for 45 rpm,
• RCA audio cable (approx. 1.0 m),
• AC adapter (approx. 1.5 m)